For Seagate Drives Ux

Detailed description of accumulators 
Seagate
www..bvg-.group..ru

Warning
The authors warn that the use of a utility  "HDD Repair  Tool for Seagate Ux "  is permissible ONLY with accumulators  Seagate Ux.  An attempt at the application of a utility on the accumulators of other models can lead to their  irreversible spoiling!

BEFORE beginning the repair of accumulator, immediately after the start of utility, against yazatel'no it is necessary to preserve in the archive its disk moduli. In the presence of external sequential PZU –to preserve its contents.
? sequential PZU it is possible to count by means of dialogue  Actions->.Flash operations;
? disk moduli it is possible to consider posr yedstvom of dialogue  Service - > CP operations.

Look the detailed description of work with these dialogues in the appropriate divisions of documentation.

Main menu
With the pushing of the right knob of "mouse", the program issues on the screen the main menu, the hierarchy of points of which is given below:
 
The designation of the points of menu will be described below.
Testing the accumulator
General information
Upon the entering of accumulator in the repair should be verified by tester the resistance between the common wire and the power buses  of +.shchV  and  +.y2V:
? on the power bus  of +.y2V  resistance must be about  70  kљ;
? on the power bus  of +.shchV  resistance must be about  2  kљ.

We further connect accumulator to pay  HRT  and start utility. Accumulator nekoto cluster by delay must leave into the readiness - in the field of the "window of light-emitting diodes" must ostat's 4 "burn" only flags  DRDY  and  DSC.

The work of utility with the accumulators, which do not emerge into the readiness on  Ata- to interface, is impossible! This is caused by the limitations of the microprogram of the very of nakopitel 4.

After the start of utility will appear the window, in which will be represented kha rakteristiki of accumulator.
 
Focus attention, that the complete name of the microprogram of accumulator, printed out in field  Family code,  contains  15  numbers, grouped into  2  groups of  3 yekh and  4 yekh fields respectively. The first group  –the version of overlay part, the second group - version of contained PZU.  However, gluing on the housing of accumulator contains only the first two fields of the version of contained PZU in the line  "Firmware".
Special features of testing accumulators  Seagate Ux
Unfortunately, all accumulators  Seagate U for a series do not permit implementation of access through  Ata- interface to the surfac

[1] [2] [3] [4] [5] [6] [7] [8] [9] 下一页

文章来自:云通信息技术网 www.kmxm.net

版权声明：部分内容转载于网络，其版权属于原作者，如果有任何内容方面的问题，请联系我们。